Your cart is empty

PUHUI T862++ IRDA Welder BGA Rework Station on Sale

T862++

9.5Kg

$271.99  $270.00
Save: 1% off

Submit a wholesale Inquiry
270 reward points
Qty: Unit(s)




Note: T862++ can be sent out from UK and USA warehouse,  the total cost to USA is 299USD and to Canada is 331 USD, to European countires(as bottom mentioned) 368USD. If you need to send out from our warehouse, please contact our online servie.

PUHUI T862++ IRDA Welder BGA Rework Station main features:

1.T862++ BGA rework station can repair the chips under 35x35mm, it is easy to target most component removal,replacement and re-work,especially to welding the mobile phone chips.

2.This T862++ adopt infrared weld technology which independent exploration.

3.T862++ infrared rework station use infrared heat,it is easy to cut through,heat proportion piercing tradition weld machine with sirocco.

4.This BGA machine can weld all the component of 15x15 to 25x25mm. and it is easily to operate.Just need one day training.

5.No need kapton tape and other bga rework accessories while use T862++ BGA rework station.

6.T862++ infrared BGA rework station has 650W heating system.The heating area widely to 120x120mm.

7.This infrared heating no have sirocco flow. Don't impact perimeter small component.Can suitable for all of the component,especially Micro BGA component.

8.T862++ Infrared heat source bulbs are long-lived, in-expensive and easily replaced.

9.The T862++ system also contains a temperature controlled touch-up iron and stand.

T862++ technical parameters:

Work floor size

280X220mm

Rated voltage and frequency

AC110v/AC220v  60/50Hz

Complete machine power

800W

Infrared heat lamp power

150W

Preheating chassis power

650W

heating size of Infrared heat lamp

Φ70mm(50x50mm)

preheating size of Preheating chassis

120x120mm

Adjustable temperature of Infrared heat lamp

200°C-350°C

Adjustable temperature o Preheating chassis

60°C-200°C

T862++ Package includes:
1pc Welding table - main body
1pc Infrared heat lamp body
1pc Temperature sensor
1pc Circuit Board support (PCB support)
1pc Power line
1pc User's manual(Compact Disc)

You may also in need:
hantek dso-2090, rma-223, nc-559-asm, ms8910, AOYUE 852A, t870a, t-862++t962aStencil Kit, high temperature tapes, BGA solder balls

T862++ detailded pictures:

 

Below bga rework station products can be sent out from UK Warehouse and USA warehouse:
ACHIIR-PRO-SC
ACHI PRO-SC
ACHI IR-6000
ACHI IR6000
ht-r390
achi ir6500
aoyue 968
T8280
atten 858d
saike 898d
ATTEN 8586>
AT8586
scotle-hr360
scotle ir360 pro
scotle-hr460c
AT969D
European countires: Belgium, Germany, Luxembourg, Netherlands, Ireland, Czech Republic,Austria, Denmark, France (Inc Monaco),Slovenia,Poland,Slovakia,Hungary Lithuania ,Spain,Italy,Sweden,Portugal ,Latvia,Estonia, Finland,Romania ,Bulgaria,Greece ,Greek Islands
USA warehouse: USA Canada



There are currently no product reviews.
NOTE: Reviews require prior approval before they will be displayed

Due to the high demand and the huge variation of the cosplay costume size, most of the costumes of our website are customized because it's unable for us to take large-scale mass production. Four steps are employed from the order processing to its finish: orders arrangement, tailoring, checkout and shipment.

 

Orders Arrangement:

There are 24 hours for us to collect and arrange the orders to our manufacturers after the customers placed an order, so if customers have some special or specific requirements for their orders after the order has placed(such as change the size, cancel order), we will handle those timely during the 24 hours. After the order arrangement, we will transfer the exact order information to our supplier and then they will begin to manufacture.

 

Tailoring: 

Once the manufacturer got the orders information from us, the designer will choose the corresponding fabric according to every order's style and customer's demands. Then they will prepare to begin the tailoring, the clipping workers will tailor the cloth according to the style and fabric provided by the designer. After that the final step is the elaborative sewing. All of these procedures are purely handmade which demands much patience and attention, so it needs four to five days for the tailoring. However, it is worthwhile as we hope our customers received a fancy costume from us.

 

Checkout:

We have special inspectors to check out the finished costumes; their job is to check two main aspects of the costumes. Firstly, check if there is some breakage or if the sewing is qualified. Secondly, they will inspect if the size, color and costume style are correspond to customers' order, also they will check if all the accessories are complete. The whole procedure is very careful, and after the product inspection, the inspectors will register and handle every costume well.

 

Shipment:

Once our shipping operator got the costumes, they will go to the internet to check the customers' shipping address and then fill in the shipping list carefully. After all of the shipping processes accomplished, we will call the International Air Service Cooperation to take the goods for delivery. It's may be relatively time-consuming as the long distance and many customs inspections, but as our shipping method is air transportation so it's save the shipping time to a large extent. Usually, the whole shipping time is 5 to 7 days if there is no problem on it, but the specific shipping time may vary from country to country.

 

Orders Arrangement (1day) + Tailoring (4-5days) + Checkout (0.5day) + Shipment (5-7days) = Get Your Costumes (12-13 business days)

 

So what you need to do is just select the style you love in our site and place an order, then you can just wait for the fancy surprise costume we made for you.


Wednesday 14 December, 2011

This product was added to our catalog on Wednesday 14 December, 2011.

    Customer Services

  • FAQ

    Make Money With Us